Piano Hinges

Piano Hinges
Using a mixture of the following hardware you can make a Piano Hingewill have the ability to work with docks 3', 4', 6', & 8' widths. The slotted design allows for the hinge to be used with many different thinknesses of decking ranging from 3/4" marine grade plywood with no sleepers all the way up to 2x6 decking on a 2x4 sleeper totaling 3" of lumber. **Note** All componentents listed on this page are individual parts. We did it this way to allow for a wide variety of uses to make it as customizeable as possible for you.
 
 
Reccommended Parts needed to create 3', 4', 6', & 8' Piano Hinge Systems
3' Hinge Assembly     4' Hinge Assembly     6' Hinge Assembly     8' Hinge Assembly
PH-TF3-1 x2   PH-TF4-1 x2   PH-TF3-1 x4   PH-TF4-1 x4
PH-PIN3-1 x1   PH-PIN4-1 x1   PH-PIN6-1 x1   PH-PIN8-1 x1
B-1W x2   B-1W x2   B-1W x2   B-1W x2
B-CLIP x2   B-CLIP x2   B-CLIP x2   B-CLIP x2
B-CB1 x10   B-CB1 x12   B-CB1 x20   B-CB1 x24
Display: List / Grid
Show:
Sort By:
PH-PIN3-1
This is the pin that you will need to make a 3' hinge when using our PH-TF3-1 piano hinges. ..
$14.88
PH-PIN4-1
This is the pin that you will need to make a 4' hinge when using our PH-TF4-1 piano hinges. ..
$18.09
PH-PIN6-1
This is the pin that you will need to make a 6' hinge. We make a 3' piano hinges (PH-TF3-1) You can ..
$24.50
PH-PIN8-1
This is the pin that you will need to make a 8' hinge. We make a 4' piano hinges (PH-TF4-1) You can ..
$30.91
PH-TF3-1
This is one part of our 3' piano hinge that is designed to be used with our Truss Frame dock systems..
$31.23
PH-TF4-1
This is one part of our 4' piano hinge that is designed to be used with our Truss Frame dock systems..
$37.69
1/2" x 1-1/2" Carriage Bolt Set
Galvanized Carriage Bolt Set - includes the bolt, washer, and nut. We use the B-CB1 carriage bolts t..
$0.69
B-1W
1" Washer Hot Dipped Galvanized. The inner diameter is 1". These are typically used with our Piano H..
$0.33
B-CLIP
This is the "Hair Pin" clip that comes stanadard with our B-PIN's. We offer it here individually in ..
$0.29
PH-S2
  This 2" x 14" x 3/8" plate is designed to be used with our Piano Hinges as a stiffener pla..
$6.82
PH-S5
  This 5" x 14" x 1/4" plate is designed to be used with our Piano Hinges as a stiffener pla..
$12.23