Dock Hardware Kit

Dock Hardware Kit
Brand: Merco Marine
Product Code: WH-DOCKKIT
Availability: In Stock
Actual Weight: 112 lbs
Price: $211.22
Qty:     - OR -   Add to Wish List
Add to Compare

Included in the kit: All fasteners and hardware.

  • 2- Wheels (WHEEL)

  • 2- Angle Braces (WH-AB)

  • 2- Angle Brace brackets (WH-W)

  • 2- T-brackets (WH-T)

  • 2- Dock side brackets (WH-P2)

  • 4- Washers (WH-WA) These are large 3/16" thick washers that go on the axles near the wheels and wheel spacers

  • 6- Washer Plates (H-W) to reinforce the WH-P2s and the WH-Ws

  • 2- SD-ABDB1 to slide over 1-1/2" sch 40 pipe. Works with the WH-AB.

  • 4- 3/8" x 3" Hex head bolt sets. (B-HB33) To attach the WH-ABs to the SD-ABDB1s and the WH-Ws

  • 12- 1/2" x 3" Carriage bolt sets

  • 4- 1/2" x 1-1/2" Hex bolt sets (B-HB1) are used to connect the WH-AB to the WH-W and SD-ABDB1

  • 12- 1/2" x 3" Carriage bolt sets (B-CB3)

  • 2- WH-SP Wheel Spacers are used to space the wheel away from the inner set of bolts to keep the wheel away from the dock in shallow water.

What you need will need to provide: The three pieces of 1-1/2" SCH 40 pipe for the axles and uprights (the reason we don't offer this is because of all the different lengths the pipes we would have keep in stock to cover every possible scenario in the width of your dock and water depth). Our hardware easily attaches to your existing wood dock.

Included in the kit:

  • 2- Wheels (WHEEL)

  • 2- Angle Braces (WH-AB)

  • 2- Angle Brace brackets (WH-W)

  • 2- T-brackets (WH-T)

  • 2- Dock side brackets (WH-P2)

  • 4- Washers (WH-WA) These are large 3/16" thick washers that go on the axles near the wheels and wheel spacers

  • 6- Washer Plates (H-W) to reinforce the WH-P2s and the WH-Ws

  • 2- SD-ABDB1 to slide over 1-1/2" sch 40 pipe. Works with the WH-AB.

  • 4- 3/8" x 3" Hex head bolt sets. (B-HB33) To attach the WH-ABs to the SD-ABDB1s and the WH-Ws

  • 12- 1/2" x 3" Carriage bolt sets

  • 4- 1/2" x 1-1/2" Hex bolt sets (B-HB1) are used to connect the WH-AB to the WH-W and SD-ABDB1

  • 12- 1/2" x 3" Carriage bolt sets (B-CB3)

  • 2- WH-SP Wheel Spacers are used to space the wheel away from the inner set of bolts to keep the wheel away from the dock in shallow water.

What you need will need to provide: The three pieces of 1-1/2" SCH 40 pipe for the axles and uprights (the reason we don't offer this is because of all the different lengths the pipes we would have keep in stock to cover every possible scenario in the width of your dock and water depth). Our hardware easily attaches to your existing wood dock.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: