Product Information
WH-DOCKKIT Dock Hardware Kit
Put wheels on your dock and roll it in and out depending on the season.
$204.88
Product Weight:
112.0000 pounds.
Included in the kit: All fasteners and hardware.
-
2- Wheels (WHEEL)
-
2- Angle Braces (WH-AB)
-
2- Angle Brace brackets (WH-W)
-
2- T-brackets (WH-T)
-
2- Dock side brackets (WH-P2)
-
4- Washers (WH-WA) These are large 3/16" thick washers that go on the axles near the wheels and wheel spacers
-
6- Washer Plates (H-W) to reinforce the WH-P2s and the WH-Ws
-
2- SD-ABDB1 to slide over 1-1/2" sch 40 pipe. Works with the WH-AB.
-
4- 3/8" x 3" Hex head bolt sets. (B-HB33) To attach the WH-ABs to the SD-ABDB1s and the WH-Ws
-
12- 1/2" x 3" Carriage bolt sets
-
4- 1/2" x 1-1/2" Hex bolt sets (B-HB1) are used to connect the WH-AB to the WH-W and SD-ABDB1
-
12- 1/2" x 3" Carriage bolt sets (B-CB3)
-
2- WH-SP Wheel Spacers are used to space the wheel away from the inner set of bolts to keep the wheel away from the dock in shallow water.
What you need will need to provide: The three pieces of 1-1/2" SCH 40 pipe for the axles and uprights (the reason we don't offer this is because of all the different lengths the pipes we would have keep in stock to cover every possible scenario in the width of your dock and water depth). Our hardware easily attaches to your existing wood dock.
Included in the kit:
-
2- Wheels (WHEEL)
-
2- Angle Braces (WH-AB)
-
2- Angle Brace brackets (WH-W)
-
2- T-brackets (WH-T)
-
2- Dock side brackets (WH-P2)
-
4- Washers (WH-WA) These are large 3/16" thick washers that go on the axles near the wheels and wheel spacers
-
6- Washer Plates (H-W) to reinforce the WH-P2s and the WH-Ws
-
2- SD-ABDB1 to slide over 1-1/2" sch 40 pipe. Works with the WH-AB.
-
4- 3/8" x 3" Hex head bolt sets. (B-HB33) To attach the WH-ABs to the SD-ABDB1s and the WH-Ws
-
12- 1/2" x 3" Carriage bolt sets
-
4- 1/2" x 1-1/2" Hex bolt sets (B-HB1) are used to connect the WH-AB to the WH-W and SD-ABDB1
-
12- 1/2" x 3" Carriage bolt sets (B-CB3)
-
2- WH-SP Wheel Spacers are used to space the wheel away from the inner set of bolts to keep the wheel away from the dock in shallow water.
What you need will need to provide: The three pieces of 1-1/2" SCH 40 pipe for the axles and uprights (the reason we don't offer this is because of all the different lengths the pipes we would have keep in stock to cover every possible scenario in the width of your dock and water depth). Our hardware easily attaches to your existing wood dock.
Customer Reviews:
There are yet no reviews for this product.
Please log in to write a review.
Last Updated: Wednesday, 22 May 2013 18:49
